§29.1015 Oil tank tests.

Each oil tank must be designed and installed so that-- (a) It can withstand, without failure, any vibration, inertia, and fluid loads to which it may be subjected in operation; and [(b) It meets the requirements of Sec. 29.965, except that instead of the pressure specified in Sec. 29.965(b)-- (1) For pressurized tanks used with a turbine engine, the test pressure may not be less than 5 p.s.i. plus the maximum operating pressure of the tank; and (2) For all other tanks, the test pressure may not be less than 5 p.s.i.]