DRS

Dek Regulatory System

Welcome to the World of Certification!

§25.3 Special provisions for ETOPS type design approvals

14 CFR 25 · General · at 25-153 (current)

Text in force at 25-153: from 25-120, effective 15 Feb 2007.

[(a) Applicability. This section applies to an applicant for ETOPS type design approval of an airplane: (1) That has an existing type certificate on February 15, 2007; or (2) For which an application for an original type certificate was submitted before February 15, 2007. (b) Airplanes with two engines. (1) For ETOPS type design approval of an airplane up to and including 180 minutes, an applicant must comply with Sec. 25.1535, except that it need not comply with the following provisions of Appendix K, K25.1.4, of this part: (i) K25.1.4(a), fuel system pressure and flow requirements; (ii) K25.1.4(a)(3), low fuel alerting; and (iii) K25.1.4(c), engine oil tank design. (2) For ETOPS type design approval of an airplane beyond 180 minutes an applicant must comply with Sec. 25.1535. (c) Airplanes with more than two engines. An applicant for ETOPS type design approval must comply with Sec. 25.1535 for an airplane manufactured on or after February 17, 2015, except that, for an airplane configured for a three person flight crew, the applicant need not comply with Appendix K, K25.1.4(a)(3), of this part, low fuel alerting.]

72 FR 1873 · Source

Report an issue

Report an issue

Is something wrong with what you are looking at? Tell the maintainer; the report is filed against this page.

What kind of issue is it? (required)

Reports are posted publicly on GitHub with the address of this page. Please don't include personal information.