Text in force at CAR3R-8: from CAR3R-0, effective 15 May 1956. OCR text
Wing flaps, their operating mechanism, and supporting structure shall be designed for critical loads occurring in the flap-extended flight conditions (see § 3.190) .with the flaps extended to any position from fully retracted to fully extended; except that when an automatic flap load limiting device is employed these parts may be designed for critical combinations of air speed and flap position permitted by the device. (Also see §§ 3.338 and 3.339.) The effects of propeller slipstream corresponding to take-off power shall be taken into account at an airplane speed of not less than 1.4V; where Vs; is the computed stalling speed with flaps fully retracted at the design weight. For investigation of the slipstream condition, the airplane load factor may be assumed to be 1.0.